ASME VIII m & y values

In order to ensure the optimum service life of our gasket materials it is important to not only choose the correct material for the application but to install and maintain it correctly. The following guidelines are designed to assist the end user in the assembly of our gasket materials:

Material Thickness m y y
  (mm) FACTOR lbf/in2 MPa
Novus 10 0.75 2.00 2175 15.0

1.50

 2.75 3625 25.0
3.00 3.50 4350 30.0
Novus 20 0.75 2.00 2175 15.0

1.50

 2.75 3625 25.0
3.00 3.50 4350 30.0
Novus 21 0.75 2.00 2175 15.0

1.50

 2.75 3625 25.0
3.00 3.50 4350 30.0
Novus 30 0.75 2.00 2175 15.0

1.50

 2.75 3625 25.0
3.00 3.50 4350 30.0
Novus 34 0.75 2.00 2175 15.0

1.50

 2.75 3625 25.0
3.00 3.50 4350 30.0
Novus 45 0.75 2.00 2000 13.8

1.50

 2.50 3500 24.1
3.00 3.00 4100 28.3
Novus Graftec 0.75 2.00 2000 13.8

1.50

 2.50 3500 24.1
3.00 3.00 4100 28.3
Uniflon 50 1.00 2.80 1500 10.3

1.50

 3.00 1600 11.0
3.00 3.80 2500 17.2
Uniflon 51 1.00 3.00 2150 14.8

1.50

 3.50 2450 16.9
3.00 4.00 2750 19.7
Uniflon 53 1.00 3.00 2100 14.5

1.50

 3.50 2450 16.9
3.00 4.00 2850 19.7
Novus TI - 2.50 4000 27.6
Novus FI - 2.00 900 6.2
Elastagraph - 1.50 800 5.5
Sigraflex Hochdruch - 2.50 4000 27.6